I am rebuilding gearbox after replacing synchros.
The problem is two fold. Firstly by the time I have fitted the front cover and rear extension the first and fourth shafts bind so it locks in under neutral. Secondly I can't locate the selector arm in the rear extension within the fork rods!
All advice welcome, thanks
Re: Gearbox rebuild
There's a very good write up on the Spridget Guru websitehttp://www.spridgetguru.com/TA0123.html... about gearbox rebuilding. You haven't identified which car you have but the A-Series cars are more or less the same. The 1500's use the Triumph single rail box but I'm sure Spridget Guru covers that too!